Wire Mesh Mounting Kit - Stainless Steel

product-main-image
$5.95

Or 4 payments of $1.49 AUD with Afterpay

  • Order Before 1pm - Same Day Shipping
  • Express Shipping Available
  • Hassle Free Returns

Stainless Steel Wire Mesh Mounting Kit for Dine a Chook Chicken Feeders and Drinkers

Dine a Chook Feeders and Drinkers are built to be installed using the moulded rear mounting hooks. As part of the Feeder or Drinker unit, these hooks are designed for strength and durability. Where a Dine a Chook Mounting Kit has been used correctly and weight is distributed evenly between the top and bottom hooks, your Dine a Chook will last for years and years.

We make installation easy by providing a complimentary Mounting Kit for timber and metal with all of our Dine a Chook Feeders and Drinkers. For wire mesh chicken coops, additional washers and bolts will be needed to fit the steel brackets.

Save yourself a trip to the hardware store with a Wire Mesh Mounting Kit. No measuring required, and no half-used packets of bolts and washers to clutter up the shed. Our Wire Mesh Mounting Kits provide everything you need for mounting a Dine a Chook Feeder or a Dine a Chook upright Drinker (4 L, 2 L or Upright Compact Automatic) on most square-gauge wire.

Contents:

4 x Bolts

4 x Large washers

4 x Nuts

If you are unsure whether a Wire Mesh Mounting Kit will suit your chicken coop, please contact us

The Dine a Chook Difference

We had chickens long before we started Dine a Chook, and we still do! We understand the problems that backyard chicken keepers face and our goal is to provide solutions.

That is why Dine a Chook Chicken Feeders and Drinkers stand out from the competition: Our products have been extensively tested in Australian backyards, including our own! Our patented innovations and unique design features really work to make backyard chicken keeping easier.

We know how important good coop management is. A clean, dry coop, and uncontaminated feed and water, are essential for poultry health. Our Feeders reduce waste, keeping feed dry and off the floor. And our Waterers keep water clean and prevent spillage.

Dine a Chook Feeders and Drinkers are made in Australia, supporting Aussie jobs. And we use genuine Lubing Drinker Outlets from Germany because they are the best for poultry. Our products are built to last and come with an exclusive guarantee. Tested in the harsh Australian climate, don’t run over them with a tractor and we bet you won’t need to buy another Feeder or Drinker again!

As a family business, the most important thing to us is our customers. Need help with an order? Want chicken keeping advice? If you have a question about your flock, give us a call on 1800 103 326 during Queensland business hours. 

Dine A Chook shipping charges are as per below and apply to Australian orders only. International orders are calculated by weight at checkout.

Weight Cost
Under 500g $9.50
Up to 1kg $11.95
1 - 3kg $11.95 - $14.95
3 - 5kg $14.95 - $18.95
5 - 7kg From $18.95
Over 7kg From $19.95

How is your order shipped?

All Dine A Chook orders are sent using Australia Post unless otherwise stated. All orders require a signature at the time of delivery unless you provide an authority to leave. We deliver to Residential and Business addresses, PO Boxes and Parcel Lockers.

Insurance

Every Dine a Chook delivery is completely insured for the total value of the items despatched and insurance coverage includes loss and damage during transit. In the unlikely event, you receive a broken item contact our office via the contact us page within 3 working days of signing for the goods so we can arrange for a replacement.

Shipping times

State Estimated delivery (business days)
Queensland 2-3 days
New South Wales 3-5 days
Victoria 5-7 days
South Australia, Tasmania & ACT 6-8 days
Western Australia & Northern Territory 8-12 days

With the exception of busy times of the year, orders received before 11am are generally shipped out that same day.

FAQ

Q. Which Feeders and Drinkers can use this kit? 

A. This Mounting Kit fits all Dine a Chook Feeders and all upright (white/red ASA) Dine a Chook Drinkers.

Q. Where can I use this Mounting Kit? 

A. This Mounting Kit is suitable for use on most wire mesh.

Warranty:

3-year Manufacturer’s Warranty on Feeder and Drinker components manufactured by Dine a Chook. Exclusions apply.

For full warranty to apply to rear-mounting hooks, unit must be mounted using the supplied brackets (i.e. this Mounting Kit) and weight evenly distributed between both hooks. The customer is responsible for all transit costs relating to rear-mounting hook damage occurring more than 3 months after purchase. Rear-mounting hooks are not covered by warranty where they are used to mount directly onto wire mesh without a Mounting Kit or brackets.

Further terms and conditions apply. See Warranties for full details. Should you have any issue regarding your Dine a Chook Chicken Feeder or Drinker please contact us so we can assist you further.